The conventional plate change required removing and exchanging heavy cylinders, every time the printing design changes, which is heavy workload for the operator. To save time, cost and workload, our APC system simplified the plate change, just exchanging the plate on the cylinder!
1. Simple plate exchange for the operator
2. Shortening plate replacement time
3. No spare cylinders required. Storing only plates, which is space-saving
4. Improvement of the precision of cylinder (reducing the trouble of uneven pressing, improving the realization of dot printing accuracy and a reducing the troubles of pressure leaking and ghost imaging, etc.)
Note: With cylinder, plate forming equipments are required for this system.
- Fit the plate into the slit
- Adjust the tension knob
and insert the plate
Make a cylindrical plate and then insert the plate to APC cylinder.
Bend both side of plate and clamp the plate with attachment, and insert it to a cylinder.
No need to dismount heavy cylinder, only remove the plate.
With this attachment type, plates can store in flat when not in use.
Water cooling type avoid rise in temperature by circulating water inside the cylinder and shaft.
